5 / 16 X 550 FT GR 100 Alloy Chain
Double-tap and hold to zoom.
Mouse over the image to zoom.

5 / 16 X 550 FT GR 100 Alloy Chain

Product Code:20S312-0550

5/16” x 550 FT Blue E Coated Grade 100 Chain
  • Grade 100 – Blue E Coated 
  • Working Load Limit 5,700 lbs 
  • Rated for Overhead Lifting 
  • 550’ drum
  • Price per Drum
  • Weight: 1.00 lbs/ft

Grade 100 Alloy Chain is made from a high strength alloy steel that provides approximately 25% higher working loads than grade 80 chain and is more resistant to fatigue and abrasion. The increased strength to weight ratio allows for the use of smaller diameter chain depending on the application.

Designed for the high demands of overhead lifting applications, it is also an excellent chain for use in recovery, towing and load securement.

Our Grade 100 chain is coated in a special blue E-coating to provide increased life and corrosion resistance without affecting the strength of the chain. Fehr Grade 100 is made to NACM guidelines and meets/exceeds the requirements of OSHA and ASTM standards.

Dimensions (approx.)
A- Wire Diameter .315"
B- Inside Length (Max.)   1.04"
C- Inside Width (range) .43"-.50"
  • Working Load Limit is the maximum working load which should ever be applied to the product under any condition. 
  • Never exceed WLL of the chain. 
  • Inspect regularly. All chain and chain attachments should be inspected regularly for visible damage, distortion, elongation, corrosion and wear that can cause breakage or reduce strength. 
  • Attachments should have a Working Load Limit at least equal to the chain with which they are used. 
  • Avoid shock loads. 
  • Use only Grade 80 or Grade 100 Alloy Chain for overhead lifting.  Proof Coil Chain, High Test Chain, and Grade 70 Transport Chains are not to be used for overhead lifting. 
  • Eliminate all twists and kinks in chain before using. 
  • All dimensions are nominal and all weights are approximate.