Products
High Test Mooring Chain - 1/2 in X 200 ft
This Grade 40 high test mooring chain is built for strength and reliability in marine environments. Made from carbon steel and hot-dip galvanized for added corrosion resistance, it offers a higher working load than proof coil chains. Commonly used for anchoring, mooring, and general marine rigging.
- Product #: 14M500-0200
- Grade: 40 High Test Mooring Chain
- Finish: Hot Dip Galvanized
- Size: 1/2 in
- Length: 200 ft
- Weight: 477 lbs
- Working Load Limit: 6900 lbs
- Packaging: Drum
Product Specifications
Code:
14M500-0200
Finish
Hot Dip Galvanized
Chain Type
- Grade 43 High Test
- Mooring
Size
1/2 in
Length
200 ft
WLL
6900 lbs
Chain Pack
Drum
Additional Product Info
Additional Specifications
The long link design of Mooring Chain allows for a matched size shackle pin to go through the mid link and the shackle body through the end link.
Other Specifications
| A) Wire Diameter: | 0.524 in |
| B) Inside Length (Max.): | 2.08 in |
| C) Inside Width (Min.): | 0.91 in |
| Overhead Lifting: | False, Do Not Use For Overhead Lifting |
| Proof Tested: | True |
| General Purpose Chain: | True |
Safety Notice
Always inspect the chain for wear, corrosion, and distortion before use. Do not exceed the rated working load limit. Use only with compatible fittings and follow all applicable marine safety standards. Not intended for overhead lifting.
Product Downloads
