Products
Grade 80 Alloy Chain - 9/32 in X 400 ft
Our Grade 80 Alloy Chain is used for overhead lifting. Grade 80 alloy chain is a heat-treated steel chain with a high strength to weight ratio. Excellent for uses such as recovery, safety, and towing chains. Use only Grade 80 Alloy Chain and fittings for overhead lifting. Made to NACM Specifications
- Product #: 19S250-0400
- Grade: 80 Alloy Chain - USA
- Finish: Black Coated
- Size: 9/32 in
- Length: 400 ft
- Weight: 303 lbs
- Working Load Limit: 3500 lbs
- Packaging: Drum
Product Specifications
Code:
19S250-0400
Finish
E Coated
Chain Type
Grade 80 Alloy
Size
9/32 in
Length
400 ft
WLL
3500 lbs
Chain Pack
Drum
Additional Product Info
Other Specifications
| A) Wire Diameter: | 0.276 in |
| B) Inside Length (Max.): | 0.90 in |
| C) Inside Width (Min.): | 0.375 in – 0.430 in |
| Overhead Lifting: | True, Specifically Designed for Overhead Lifting |
| Proof Tested: | True |
Safety Notice
- Working Load Limit is the maximum working load which should ever be applied to the product under any condition
- Never exceed WLL of the chain
- Inspect regularly. All chain and chain attachments should be inspected regularly for visible damage, distortion, elongation, corrosion and wear that can cause breakage or reduce strength
- Attachments should have a Working Load Limit at least equal to the chain with which they are used
- Avoid shock loads
- Use only Grade 80 Alloy Chain for overhead lifting. Proof Coil Chain, High Test Chain, and Grade 70 Transport Chains are not to be used for overhead lifting
- Eliminate all twists and kinks in chain before using
- All dimensions are nominal and all weights are approximate
Product Downloads
