Products

Home Products Rigging Hardware Eyebolts Eye Nuts

1/2 in Hot Dip Galvanized Eye Nut With 5/8 in UNC Tap

Designed to be used with Hooks, Slings, thimbles and other rigging attachment hardware and rope. Our Eyenuts are Load Rated and can be used for vertical lifts, but should not be used in angular lifting. Strength ratings are based on a vertical pull and do not take into consideration threaded attachments. Forged from High Quality Carbon Steel.

  • Product #: EYENUT500
  • Finish: Hot Dip Galvanized
  • Working Load Limit: 3600 lbs
  • Minimum Breaking Strength: 14400 lbs
  • I/S Length: 1.90 in
  • I/S Width: 1.40 in
  • Overall Height: 3.20 in
  • Outside Width: 2.50 in
  • Internal Thread: 5/8 - 11 in
1/2 in Hot Dip Galvanized Eye Nut With 5/8 in UNC Tap

Click to enlarge

Product Specifications

Code:

EYENUT500

Finish

Hot Dip Galvanized

Size

1/2 in - 5/8 in

Additional Product Info

Safety Notice

Always confirm the eye nut’s load rating and compatibility with your application. Inspect before each use for cracks, deformation, or corrosion. Do not exceed rated capacity or use for angular lifts without proper hardware and guidance. Improper use may result in failure and serious injury.