Products
Stainless Steel Net Clip Set
Net Clips were designed specifically for use on steel cables. They are used by the U.S. Navy and Coast Guard to fabricate safety nets and have found wide acceptance whenever wire rope nets are needed. The one size available will accept “cross-over” of 7 x 7 or 7 x 19 construction cable in unjacketed cable diameters of 5/32, 3/16, 7/32 and 1/4 inch and Jacketed cables with outside diameters of 5/32, 3/16, 7/32 and 1/4 inch.
Use with Wire Rope Net Clip Tool 1-N
Use with Wire Rope Net Clip Tool 1-N
Product Specifications
Code:
NETCLIP-CP3-2
Additional Product Info
Other Specifications
| A | B | C | D | E | F | G | H | I | J | K | L | M | N | O |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 15/16 | 1/4 | 15/16 | 3/16 | 1-1/8R | 9/32 | 1/4 | 15/16 | 1-3/16 | 1-3/16 | 3/4 | 7/16 | 3/16 | 1-1/8R | 1/2 |
Safety Notice
Always use proper personal protective equipment (PPE), such as gloves and eye protection, when handling and installing stainless steel net clips. Ensure clips are securely fastened and compatible with the cable or netting being used. Improper installation may result in equipment failure or injury. Inspect clips regularly for signs of wear, corrosion, or damage, and replace as needed. Keep out of reach of children and store in a safe, dry location.
Product Downloads