Products
Grade 80 Alloy Chain - 1/2 in X 100 ft
Our Grade 80 Alloy Chain is used for overhead lifting. Grade 80 alloy chain is a heat-treated steel chain with a high strength to weight ratio. Excellent for uses such as recovery, safety, and towing chains. Use only Grade 80 Alloy Chain and fittings for overhead lifting. Made to NACM Specifications
- Product #: 18S500-0100
- Grade: 80 Alloy Chain - USA
- Finish: Black Coated
- Size: 1/2 in
- Length: 100 ft
- Weight: 248 lbs
- Working Load Limit: 12000 lbs
- Packaging: Drum
Product Specifications
Code:
18S500-0100
Additional Product Info
Other Specifications
| A) Wire Diameter: | 0.512 in |
| B) Inside Length (Max.): | 1.64 in |
| C) Inside Width (Min.): | 0.69 in – 0.077 in |
| Overhead Lifting: | True, Specifically Designed for Overhead Lifting |
| Proof Tested: | True |
Safety Notice
- Working Load Limit is the maximum working load which should ever be applied to the product under any condition
- Never exceed WLL of the chain
- Inspect regularly. All chain and chain attachments should be inspected regularly for visible damage, distortion, elongation, corrosion and wear that can cause breakage or reduce strength
- Attachments should have a Working Load Limit at least equal to the chain with which they are used
- Avoid shock loads
- Use only Grade 80 Alloy Chain for overhead lifting. Proof Coil Chain, High Test Chain, and Grade 70 Transport Chains are not to be used for overhead lifting
- Eliminate all twists and kinks in chain before using
- All dimensions are nominal and all weights are approximate
Product Downloads
