Safety Shackle with Nut & Pin - 3/4 in
Fehr Brothers offers a variety of long lasting and robustly designed shackles to meet your needs including load rated anchor shackles, chain or ‘Dee’ shackles, safety shackles, commercial shackles, and a range of stainless steel shackles.
Bolt type safety shackles are recommended for permanent or long-term applications, or if there is a risk of a load sliding on the shackle pin, causing it to rotate. The added safety measure from bolt/nut/cotter pin is the reason these shackles are also called safety anchor shackles. The nut and cotter secondary securement system eliminates the requirement to tighten pin before each lift or movement of load.
Bolt type safety shackles are recommended for permanent or long-term applications, or if there is a risk of a load sliding on the shackle pin, causing it to rotate. The added safety measure from bolt/nut/cotter pin is the reason these shackles are also called safety anchor shackles. The nut and cotter secondary securement system eliminates the requirement to tighten pin before each lift or movement of load.
- Product #: DRSAF750
- Finish: Hot Dip Galvanized
- Grade: Load Rated
- Size: 3/4 in
- Pin Diameter: 7/8 in
- Weight: 2.20 lbs/ea
- Working Load Limit: 9500 lbs
Product Specifications
Code:
DRSAF750
Finish
Hot Dip Galvanized
Shackle Type
Safety
Shackle Grade
Load Rated
Size
3/4 in
WLL
9500 lbs
Additional Product Info
Safety Notice
- Never exceed Working Load Limit.
- Inspect Shackles regularly. Replace if worn, distorted or damaged.
- Ensure pin is fully engaged.
- Seize shackle pin with wire.
- Use only Duty Rated Shackles, with embossed WLL, for overhead lifting.