-
- Some services are not accessible on a smartphone.
- Quick Order
- Home>
- By Industry>
- Door Hardware>
- Tools>
- Chicago Grip for High Strength Cables, Messenger,Guy Strand .218'' to .550''
Chicago Grip for High Strength Cables, Messenger,Guy Strand .218'' to .550''
Product Code:CP1692-5
Chicago® Grip - for Extra-High-Strength Cables, Messenger, Guy Strand.
Double ''V'' grooves give four-point contact, reducing chance of slipping and providing proper alignment of wire and cable
Designed for use on aluminum, copper, weatherproof coated wire, PVC covered conductors and messenger and guy strand. Designed for cable sizes from .218'' (5.54 mm) to 0.550'' (13.97 mm). When pulling EHS (extra-high-strength) galvanized-steel cable, the galvanizing has a tendency to coat the jaws of any grip, causing the cable to slip.
Product: | CP1692-5 |
Brand: | Klein Tools |
Type: | Cable Puller |
Approx. Weight Each : | 6.40 lbs. (2.9 kg) |
Jaw Length: | 5" (127 mm) |
Maximum Cable: | .55" |
Maximum Safe Load-kg: | 3629 kg |
Maximum Safe Load-lbs.: | 8000 lbs. |
Minimum Cable: | .218" |
Sub Brand: | Chicago Grip |
Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
When used on/near energized lines, ground, insulate, or isolate grip before pulling.
Do not exceed rated capacity.
Always match proper size and type of grip to application.
Grips are to be used for temporary installation, not for permanent anchorage.